Farady oil immersed transformer,oil immersed distribution transformer: 三月 2017

2017年3月30日星期四

Two types of oil immersed power transformer

One types of oil immersed power transformer ,The usual transformers are double-winding transformers, that is, there are two windings on the core, one for the original winding, one for the secondary winding.
Another type of oil immersed transformer Three-winding transformers are larger capacity transformers (above 5600 kVA) to connect three different voltage lines. In special cases, there are transformers that use more windings.

2017年3月26日星期日

oil type transformer, reason for the temperature rise

In the oil type transformer are generally used in a class of insulation, insulation heat resistance of 105 ℃.
As the ambient temperature is generally lower than 40 ℃, so the transformer winding temperature generally reach the limit operating temperature.
oil immersed distribution transformer ,Even in a short time to reach 105 ℃, because the time is very short, the insulation of the winding is not directly dangerous.

2017年3月22日星期三

oil immersed distribution transformer Features

oil immersed distribution transformer Features
Using high-performance silicon steel sheet, coil conductor and insulation materials
Small size and light weight
Energy saving
Oil type transformer is easy installation

2017年3月18日星期六

application performance of oil immersed transformer

The oil immersed transformer can be safely reduced to the user can safely use the voltage to ensure that people can safely use electricity.In the use of transformers, pay attention to oil and dry processing workers and, if the oil transformer for a long time not used, running time Too long or other aspects of the situation may cause changes in transformer insulation, internal water or deterioration of oil and other phenomena, must be timely for the transformer oil and drying treatment, to further enhance the application performance of oil-immersed transformers.

2017年3月14日星期二

oil immersed distribution transformer Technical Specifications

oil immersed distribution transformer Technical Specifications
1. Voltage class: 6~35kV
2. Model of voltage regulation: Off-excitation or on-load tap changer
3. Tapping range: 5%, 2x2.5%,
4. Power Capacity: 30-4000kVA
5. Frequency: 50Hz or 60HZ
6. Phase No.: Single phase or three phases
7. Vector Group: Yyn0 or Dyn11 or according to customers' requirements
8. Impedance voltage: 4~9% or according to customers' requirements
9. oil transformer Service condition: 100% relative humidity, ambient temperature not more than 40ºC or according to customers' requirements
10. Type of cooling: AN or AF
11. Guard class: IP00, IP20, IP23
12. Thermo-tolerance class of insulation: F
13. Insulation level: A. For 10kV class: LI75AC35; B. For 35kV class: LI170AC70

2017年3月10日星期五

oil type transformer -Scope of application

oil immersed distribution transformer is safe, non-pollute, and flame proof which can be installed directly on the load centre with the merits of free maintenance, easy installation, low combined operation cost, low loss and excellent humidity resistance.
oil type transformer -Scope of application
High-rise buildings, airports, terminals, power plants, transformer stations, residential areas or packages of various sites.

2017年3月5日星期日