Oil Type Distribution Transformer Test Laboratory

Farady oil immersed distribution transformer test Laboratory is capable of doing routine, type special tests of transformers & shunt reactors up to 31,5 MVA 66 kV, according to IEC,IEEE, ANSI standards, domestic & foreign customer specifications. Test area of Oil type Power Transformer Test Laboratory is 5 m x 8 m (width & length). In order to obtain the grounding resistance value below 0,5 Ω, grounding rods that connected to each other, piled under test area. Surface of test area was covered by aluminum plate that connected to grounding rods via different points.Oil Type Distribution transformers,Farady ac power transformer, earthing transformers, rectifier transformers, booster transformers, single-phase transformers & shunt reactors can be tested in Oil Type Distribution & Medium Power Transformer Test Laboratory.

Three Phase Pad Mounted Transformer

Three Phase Pad Mounted Transformer

Farady Electric’s three phase pad mounted distribution transformers provide a reliable and affordable solution for clients who need to reduce their overall operating costs. They are low-profile, compartment-type transformers, which are generally used for step-down purposes from an underground primary cable supply suitable for mounting outdoors on pads without additional protective enclosures, and meet the following standard: IEC60076,ANSI/IEEEC57.12.00, C57.12.20,C57.12.38, C57.12.90, BS171, SABS 780 etc.

http://www.farady-electric.com/three-phase-pad-mounted-transformer/

Single Phase Pad Mounted Transformer

Single Phase Pad Mounted Transformer

Farady Electric’s single phase pad mounted distribution transformers provide a reliable  and affordable solution for clients who need to reduce their overall operating costs. they  are low-profile, compartment-type tranformers,which are generally used for step-down purposes from an undergroud primary cable supply suitable for mounting outdoors on  pads without additional protective enclosures,and meet the following standard:
IEC60076,ANSI/IEEEC57.12.00, C57.12.20,C57.12.38, C57.12.90, BS171, SABS 780 etc

http://www.farady-electric.com/single-phase-pad-mounted-transformer/

Applications of Farady Oil immersed power transformers

Farady ac power transformer is suitably positioned accessories to simplify the maintenance operations without additional equipment.Farady Oil immersed power transformer can be installed indoor or outdoor, so they are suitable for every type of application. They can be also installed in areas where there is fire risk, just using not flammable oils. Besides, oil immersed transformers can be installed in high polluted areas, since opportunely treated with external coating adapted for any type of atmospheric pollution. We are also able to respect customer specifications for painting and coatings (i.e. zinc coating and metallization). Such characteristics are normally.

Farady oil immersed power transformer are appreciated

Our range of oil immersed transformers is from 50 kVA to 30 MVA with voltage up to 145 kV. For decades farady oil immersed power transformer are appreciated for their reliability and are ideal for installation, above all, where installation outdoors is required. The traditional oil transformers are available both in the version with oil keeper or hermetic type with integral filling. Upon indication of the customer, they can be equipped with special control and safety devices and with the use of biodegradable oils.

Gilled Radiator Dtep Up Transforme

Gilled Radiator Dtep Up Transforme

Farady offers a complete range of distribution transformers designed to grant the reliability, durability, and efficiency required in utility, industrial, and commercial applications. Farady’s liquid filled transformers are manufactured in accordance with the most demanding industry and international standards. Compliance with important standards from IEC to VDE, is a matter of course, just as much as the exclusive use of high-quality materials Qualified employees implement the demanding standards in daily practice.

http://www.farady-electric.com/gilled-radiator-step-up-transformer/

Low power oil immersed transformers

The distribution Transformer refers to the product that includes one winding divided into several branches without upper and low electrical connection. According to the structural characteristics, the products can be divided into axial split transformer and radial split transformer. Farady offers a wide range of low power oil immersed transformers such as generator duty, unit auxiliary transformers and multi winding transformers. All these transformers are customized for industrial plants and distribution substations. Our transformers are extremely versatile with robust construction and highest quality standards.

Single Phase Pole Mounted Transformer

Single Phase Pole Mounted Transformer (conventional type)

Farady Electric manufacture a complete range of single-phase and three phase overhead distribution transformers, we always designed with increased margins of safety and reliablity,and meet the following standard:

IEC60076,ANSI/IEEEC57.12.00, C57.12.20, C57.12.90, BS171, SABS 780 etc

http://www.farady-electric.com/single-phase-pole-mounted-transformer-conventional-type/

Amorphous Alloy Transformer

Amorphous Alloy Transformer

An amorphous metal transformer (AMT) is a type of energy efficient transformer found on electric grids. The magnetic core of this transformer is made with a ferromagnetic amorphous metal. The typical material (Metglas) is an alloy of iron with boron, silicon, and phosphorus in the form of thin (e.g. 25 µm) foils. These materials have high magnetic susceptibility, very low co ercivity and high electrical resistance. The high resistance and thin foils lead to low losses by eddy currents when subjected to alternating magnetic fields. On the downside amorphous alloys have a lower saturation induction and often a higher magnetostriction compared to conventional crystalline iron-silicon electrical steel .  An amorphous metal transformer (AMT) is a type of energy efficient transformer found on electric grids. The magnetic core of this transformer is made with a ferromagnetic amorphous metal. The typical material (Metglas) is an alloy of iron with boron, silicon, and phosphorus in the form of thin (e.g. 25 µm) foils. These materials have high magnetic susceptibility, very low co ercivity and high electrical resistance. The high resistance and thin foils lead to low losses by eddy currents when subjected to alternating magnetic fields. On the downside amorphous alloys have a lower saturation induction and often a higher magnetostriction compared to conventional crystalline iron-silicon electrical steel .

http://www.farady-electric.com/amorphous-core-transformer/

All specific Farady oil immersed power transformer requirements are met

With our customized design are we flexible to meet various requirements of customers. Farady oil immersed power transformer will be made to order and handled as an individual project to be sure that all specific requirements are met.The customization process covers everything from both electrical and mechanical design parameters to the level of accessories and instrumentation. This gives us full freedom to meet special requirements on impedance, level of losses, noise level and it also gives us the possibility to fit the farady transformer factory into places with space restrictions.

Our standard farady distribution transformers are hermetically sealed

Our standard farady oil immersed distribution transformers are manufactured to meet the requirements of international standards (IEC). Design according to other national standards (ANSI, BS etc.) is available upon request. Our standard farady distribution transformers are hermetically sealed and made with corrugated tank design. The flexible corrugated cooling will take up the oil expansion. Upon request can the transformer be made free breathing, which means adding an oil expansion/conservator tank equipped with a dehydrating breather. The energy losses are standardized to three categories; normal, medium and low losses. Other specific requirements in terms of energy losses can be achieved with our customized design. The level of accessories and monitoring equipment is limited to such types that can be retrofitted to the standard design.

Three Phase Automatic Voltage Regulator

Variation of voltage can have detrimental effects on Utilities and their customers. To prevent customer complaints, loss of revenue due to sub-normal voltage, and increased costs due to higher line losses, FARADY has designed the SVR Voltage Regulator with you, “The Utilities”, in mind. With over 10 years of experience, FARADY has designed the most reliable regulator ever assembled.

Our expertise in both technology and service gives us an additional advantage in the custom engineering necessary for most 3-phase regulator applications. Many times refined and improved since, the SVR voltage regulator has proven its reliability and durability in the toughest environments. Unit construction, tough paint and side inspection door are just a few of the time-tested features of today’s SVR.

http://www.farady-electric.com/three-phase-automatic-voltage-regulator/

SINGLE PHASE STEP VOLTAGE REGULATOR

SINGLE PHASE STEP VOLTAGE REGULATOR

Farady Electric Co.,Ltd VR-8 single phase step voltage regulators are tap-changing autotransformers. They regulate distribution line voltages from 10% raise (boost) to 10% lower (buck) in thirty-two steps of approximately 5/8% each. Voltage ratings are available from 2400 volts (60 kV BIL) to 34,500 volts (200 kV BIL) for 60 Hz and 50 Hz systems. Internal potential winding taps and an external ratio correction transformer are provided on all ratings so that each regulator may be applied to more than one system voltage. Smaller kVA sizes are supplied with support lugs for pole mounting and with substation or platform tie down provisions. Larger sizes are provided with substation bases with pad-mounting provisions.

http://www.farady-electric.com/single-phase-step-voltage-regulator/

Farady oil immersed power transformer series are mainly used in agroindustrial power grid

Farady oil immersed power transformer series are mainly used in agroindustrial power grid for urban and rural and transmission and distribution for the industrial and mining enterprise. This product involves oil immersed self-cooling, non-excitation voltage regulation, pan seal more than 50 new varieties and structures, the characters of which are stable performance, high reliability, compact conformation, beautiful appearance and energy and consumption saving, free of maintenance and repair, etc. This method is used for oil immersed transformers. In this method, the heat generated in the core and winding is transferred to the oil. According to the principle of convection, the heated oil flows in the upward direction and then in the radiator. The vacant place is filled up by cooled oil from the radiator. The heat from the oil will dissipate in the atmosphere due to the natural air flow around the transformer. In this way, the oil in transformer keeps circulating due to natural convection and dissipating heat in atmosphere due to natural conduction.

The farady distribution transformer is the first essential component

We have marked a distinct and dynamic position in the market by providing high quality farady step up transformers which is widely used at commercial and industrial places. The offered transformer is manufactured using superior grade components with the help of pioneered techniques under the surveillance of talented. The farady distribution transformer is the first essential component for energy transmission, allowing energy supplied by the generator to be transferred to the network at the required voltage. It is static device which steps up or step down the alternate current voltages and it is working on the principle of mutual induction. The main function of the distribution transformer is to transfer electric power from one circuit to another, between with no direct connection exists.